How to Fix Belkin Wireless Router Firmware Update Failure?

Belkin routers allow you to connect the smart home devices to the Wi-Fi network. Whenever you face issues in connecting your router to the Wi-Fi then you must check the firmware version of your device. A Belkin router may start showing performance issues if it doesn’t have the updated firmware version. Most of the issues on network devices are due to outdated firmware. 

To enhance the performance of your Belkin device, update its firmware to the advanced version. Download and install the latest firmware for your Belkin wi-fi router to add new features and fix previous bugs. You may receive errors while updating the Belkin router firmware. 

There are several reasons that can lead to the failure of the firmware update. In case, you are unable to update the Belkin firmware, check out this short guide. In this guide, we provide some troubleshooting tips to fix Belkin Wireless Router Firmware Update Failure. 

Check whether the Belkin Router has latest firmware version:

Step 1: Log in to the configuration page of the Belkin router using either 192.168.2.1 the default IP address or belkinrange.net the default web address.
Step 2: Click the ‘Utilities’ on the Belkin setup page.
Step 3: Under ‘Utilities’, click on the ‘Check Firmware’ option to find whether the device has the latest version.

Download the latest version, if your device is having the outdated version. Follow the below steps to download the latest version of the Belkin firmware.

Click on the direct download link given on the Belkin router configuration page and download the latest firmware version for your router. After that, you need to save the downloaded firmware file on your desktop. Now,

Steps to update the Belkin router firmware:

• On the basic home page of the Belkin wi-fi router, click on the ‘Advanced’ tab.
• Under the ‘Admin’ tab, click on the Browse button to select the downloaded file.
• Now, click on the ‘Update’ button to update the Belkin firmware.
• Click on the ‘Continue’ button to start the firmware update process. It will take a few minutes to update the firmware to the latest version.
• The router Belkin reboots automatically after you complete the update.

How to Fix Belkin Firmware Update Failure?

The Belkin firmware update process may fail or you may face issues. Following are the few simple steps that can be used to rectify the firmware failure issues:

1. Make Sure the Ethernet cable from the computer is securely connected to the Belkin device.
2. Never access the Belkin web interface using a wireless connection when you are attempting to update the firmware.
3. There is a chance that you might have installed an older or incompatible firmware version for your router model.
4. In this case, you can download the file from Belkinrange.net. While it is true that Belkin router control panel is not 100% reliable in terms of offering the latest firmware, at Belkinrange.net you will always be offered the latest firmware versions.
5. Check if you have uploaded the correct file before updating the firmware.
6. Next, restart the Belkin wifi router and your computer device. After that, perform the firmware update process again for the Belkin device. To know how to power cycle the Belkin device, contact our experts.
7. If all the above steps fail, then the last option is to reset the Belkin device. Press and hold the reset button placed on the back of your Belkin wireless router. After reset, reconfigure it and repeat the same procedure.